Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : Headlight bulb

Toyota Tacoma - Headlight bulb

Toyota Tacoma (2016-2024 / N300)
How to replace a Toyota Tacoma headlight bulb
To replace the headlight bulb of your Toyota Tacoma late model (year 2016-2022) simply follow the procedure below. First, park your vehicle safely on a level …read all…
Posted on 3 April 2023 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the headlight bulb on Toyota Tacoma 2
Replacing the headlight bulb of your Toyota Tacoma second series (year 2005-2015) will take you just a few minutes. Thanks to the following guide, in fact, you …read all…
Posted on 24 November 2022 by ScegliAuto
Toyota Tacoma (2016-2024 / N300)
How to replace the Toyota Tacoma headlight bulb
Today we will see, in this short guide, the steps that will allow us to disassemble and replace the Toyota Tacoma headlight bulb. First we open the engine hood …read all…
Posted on 15 October 2022 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the Toyota Tacoma headlight bulb?
The replacement of the Toyota Tacoma headlight bulb is carried out by opening the hood, so that the circular cover of the internal part of the corresponding …read all…
Posted on 16 September 2022 by ScegliAuto
Toyota Tacoma (2016-2024 / N300)
How to replace the low beam bulbs in the Toyota Tacoma?
In this tutorial we can see how to replace the low beam bulbs in the Toyota Tacoma, very simple and fast operation. First of all, let's make sure that the key …read all…
Posted on 10 September 2022 by ScegliAuto
Airbags (1) Shock absorbers (3) Car stereo (4) Battery (7) Spark plugs (1) Bodywork (1) Key (11) -board computer (5) Checks and maintenance (15) Bearing (1) Brake discs (1) Headlight (4) Tail light (8) Air filter (5) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Accessory Kit (3) Light bulb (3) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (2) Engine oil (4) Door panel (3) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (2) Gear Shift Knob (1) Door (1) Instrument cluster (9) Wheel (2) Fuse box (7) Seat (2) Lock (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos