Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Toyota Tacoma 2

Model: Toyota Tacoma N270, N260, N250, N240, N220, MK 2 - Years 2005-2015
Part: Headlight bulb

Replacing the headlight bulb on your second-generation Toyota Tacoma (2005-2015) takes just a few minutes. With the following guide, you can easily complete the entire operation without any difficulty. First, turn off the vehicle and park it on a flat surface. Next, fully raise the hood and disconnect the electrical connector located at the back of the headlight. At this point, remove the protective cap and replace the old bulb with the new one. Finally, reassemble the various components you removed earlier, and you're done.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Toyota Tacoma?
How to Replace the Headlight Bulb on a Toyota Tacoma?
Toyota Tacoma (1995-2004 / N150, N190, N140, N160, N170) To replace the headlight bulb on a Toyota Tacoma, open the hood and access the back of the headlight, where the connector for the bulb to be replaced…
How to Replace the Headlight Bulb on a Toyota Tacoma?
How to Replace the Headlight Bulb on a Toyota Tacoma?
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) To replace the headlight bulb on a Toyota Tacoma, open the hood and access the back of the headlight that needs the bulb replacement. Here, detach th…
How to Replace the Headlight Bulb on a Toyota Tacoma
How to Replace the Headlight Bulb on a Toyota Tacoma
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) To replace the headlight bulb on a Toyota Tacoma, open the hood to access the circular cover on the inside of the corresponding headlight. Once the c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos