Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Toyota Tacoma

Model: Toyota Tacoma N300 - Years 2016-2026
Part: Headlight bulb

Today, you will learn the steps to remove and replace the headlight bulb on a Toyota Tacoma. First, open the hood and start by removing the plastic cover of the bulb; then disconnect the bulb from the electrical connector to remove it, as shown in the video. At this point, replace the bulb with a new one of the correct type (in this case, H11); insert it correctly into the connector and reinstall it into the headlight assembly, following the video tutorial to the end!

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Toyota Tacoma
How to Replace the Headlight Bulb on a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) To replace the headlight bulb on your latest model Toyota Tacoma (2016-2022), follow these steps. First, park the vehicle safely on a flat surface an…
How to Replace the Headlight Bulb on a Toyota Tacoma?
How to Replace the Headlight Bulb on a Toyota Tacoma?
Toyota Tacoma (1995-2004 / N150, N190, N140, N160, N170) To replace the headlight bulb on a Toyota Tacoma, open the hood and access the back of the headlight, where the connector for the bulb to be replaced…
How to Replace the Headlight Bulb on a Toyota Tacoma 2
How to Replace the Headlight Bulb on a Toyota Tacoma 2
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) Replacing the headlight bulb on your second-generation Toyota Tacoma (2005-2015) takes just a few minutes. With the following guide, you can easily c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos