Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : Outside rearview mirror

Toyota Tacoma - Outside rearview mirror

Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the outside rearview mirror on the Toyota Tacoma?
In order to replace the outside rearview mirror of the Toyota Tacoma it is necessary to remove the triangular cover at the inside of the mirror. Next, you will …read all…
Posted on 21 October 2022 by ScegliAuto
Toyota Tacoma (2016-2024 / N300)
How to remove the outside rearview mirror of the Toyota Tacoma
Today we will see, in this video tutorial, how to disassemble and replace the exterior mirror of the Toyota Tacoma, in simple and quick steps. First we open …read all…
Posted on 19 April 2024 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the outside rearview mirror on Toyota Tacoma
Today we will see, in this short and simple guide, the procedure required to remove and replace the exterior rearview mirror of the Toyota Tacoma. First we …read all…
Posted on 6 April 2024 by ScegliAuto
Airbags (1) Shock absorbers (3) Car stereo (4) Battery (7) Spark plugs (1) Bodywork (1) Key (11) -board computer (5) Checks and maintenance (15) Bearing (1) Brake discs (1) Headlight (4) Tail light (8) Air filter (5) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Accessory Kit (3) Light bulb (3) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (2) Engine oil (4) Door panel (3) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (2) Gear Shift Knob (1) Door (1) Instrument cluster (9) Wheel (2) Fuse box (7) Seat (2) Lock (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos