Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : Manufacturer emblem

Toyota Tacoma - Manufacturer emblem

Manufacturer Emblem Toyota Tacoma (2016-2026 / n 300)

Toyota Tacoma (2016-2026 / N300)
How to Change the Emblems on the Toyota Tacoma?
Removing the old badges on the Toyota Tacoma is not difficult, although it requires a bit of patience and time. They are all glued on, with no screws or other …Read all…
Posted on 23 July 2026 by ScegliAuto
Airbag (1) Shocks (3) Car stereo (4) Battery (6) Spark plugs (1) Body (1) Key (14) Onboard computer (1) Checks and maintenance (14) Bearing (1) Brake rotors (1) Headlight (5) Tail light (9) Air filter (5) Cabin air filter (6) Oil filter (1) Parking brake (1) Clutch (1) Accessory kit (3) Light bulb (3) Headlight bulb (8) Tail light bulb (5) Interior dome light bulb (1) License plate light (1) (1) Handle (2) Engine oil (4) Clock (11) Door trim panel (3) Front bumper (1) Rear bumper (2) Brake pads (3) Shift knob (1) Car door (2) Wheel (2) Fuse box (13) Seat (2) Door lock (1) Side mirror (3) Warning light – error code (11) (18) Tire pressure warning light (8) Service warning light (21) Manufacturer emblem (1) Windshield wipers (3) Blower motor (2)

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos