Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Emblems on the Toyota Tacoma?

Model: Toyota Tacoma N300 - Years 2016-2026
Part: Manufacturer emblem

Removing the old badges on the Toyota Tacoma is not difficult, although it requires a bit of patience and time. They are all glued on, with no screws or other systems holding them in place, so to remove them, simply scrape them off while being careful not to damage the body. If the emblems are very old, heat them with a hair dryer to soften the adhesive. Next, with the body clean, apply the new emblems (also adhesive). If needed, use tape to help position them accurately.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Tacoma (2016-2026 / N300) In this video, you can see how the authors completely transformed the exterior appearance of the Toyota Tacoma using the wrapping technique. This can…
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) This guide provides the main instructions on how to reset the tire pressure monitoring system light on the Toyota Tacoma. Before recalibrating the TP…
Toyota Tacoma (2016-2026 / N300) For illustrative purposes, we will see the steps that will allow us to deactivate the traction control on the Toyota Tacoma; it is recommended not to…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos