Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the "Viper Cut" on the Front of the Toyota Tacoma

Model: Toyota Tacoma N300 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Body

See other generations:
Video tutorial

The "Viper Cut" is a small cut, very popular among Toyota Tacoma owners, made on the front of the vehicle that enhances the aggressiveness of the front end. It is easy to do and has a great effect. In addition to the metal cutting tools, you need to get an edge trim that accentuates the cut and protects the bodywork, which can be found on Amazon as "CloudBuyer car door edge guards." As suggested in the video, highlight the body profile of the vehicle with body tape, then, following the highlighted profile, cut the metal part.

Naturally, you also need to cut a part of the inner fender, and the free part must be secured so it doesn't rattle. At this point, just insert the trim that finishes the cut and protects it from corrosion.

Glue the starting and ending parts, and the job is done.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Replacing the Front Wheel Bearing on a Toyota Tacoma
Replacing the Front Wheel Bearing on a Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) In this guide, follow the instructions to remove and replace the front wheel bearing on a Toyota Tacoma. First, lift the vehicle and remove the front…
How to Disable Traction Control on a Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To disable traction control on a Toyota Tacoma, insert the ignition key into the ignition switch to turn on the instrument panel. Once the panel is o…
Removing the Front Door Panel of the Toyota Tacoma
Removing the Front Door Panel of the Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) In today's video, you will see the procedure necessary to remove the front door panel of the Toyota Tacoma. First, open the front door and start by r…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos