Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wheel Bearing on a Toyota Tacoma

Model: Toyota Tacoma MK 2, N220, N240, N250, N260, N270 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Bearing

See other generations:
Video tutorial

In this guide, follow the instructions to remove and replace the front wheel bearing on a Toyota Tacoma. First, lift the vehicle and remove the front wheel.

Next, remove the bolts securing the brake caliper, located at the back, as shown in the video. At this point, remove the brake rotor and the cap from the center bearing nut; then, unscrew the center nut to extract and remove the wheel bearing.

Finally, replace it with the new one, pressing it in until it is fully seated; then reassemble everything!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of the Toyota Tacoma
Removing the Front Door Panel of the Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) In today's video, you will see the procedure necessary to remove the front door panel of the Toyota Tacoma. First, open the front door and start by r…
Guide to Removing the Front Door Panel of the Toyota Tacoma
Guide to Removing the Front Door Panel of the Toyota Tacoma
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) In this short guide, you will learn the procedure to remove the front door panel of the Toyota Tacoma in simple steps. First, open the front door and…
Removing the Door Panel of the Toyota Tacoma
Removing the Door Panel of the Toyota Tacoma
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) In this guide, you will find instructions to remove the front door panel of the Toyota Tacoma. First, open the front door and start by unscrewing all…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos