Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front wheel bearing on the Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Bearing

See other generations:
Video tutorial

The instructions in this guide will show you how to remove and replace the front wheel bearing on the Toyota Corolla. First, lift the vehicle and start unscrewing the wheel bolts to remove the wheel; then remove the front brake caliper by unscrewing the fixing screws and pressing on the caliper piston, as shown in the video.

At this point, remove the brake disc by unscrewing the central nut; then proceed to extract the front driveshaft and subsequently the bearing, replacing it with the new one!


Posted on 13 March 2026 by ScegliAuto


Related tutorials

Replacing the Wheel Hub Bearing on a Toyota Corolla
Replacing the Wheel Hub Bearing on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Replacing the front wheel hub bearing requires some skill and a set of specific tools for proper installation, such as pullers and a press. First, li…
How to Replace the Front Brake Pads on a Toyota Corolla
How to Replace the Front Brake Pads on a Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) To replace the front brake pads on a Toyota Corolla, lift the vehicle so you can loosen the bolts securing the corresponding front wheel. Once these …
How to Replace the Timing Chain Tensioner on a Toyota Corolla?
How to Replace the Timing Chain Tensioner on a Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To replace the timing chain tensioner on a Toyota Corolla, lift the car using a ramp and loosen the bolts securing the right front wheel, completely …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos