Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wheel Hub Bearing on a Toyota Corolla

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Bearing

Replacing the front wheel hub bearing requires some skill and a set of specific tools for proper installation, such as pullers and a press. First, lift the vehicle and remove the wheel. Remove the brake caliper along with its bracket. Mark the indentation of the half-shaft fixing nut to unscrew it without damaging the thread, then extract the half-shaft. Remove the ball joint from the steering rack support at the hub and complete the disassembly by removing the fixing bolts from the shock absorber. At this point, the hub support is ready for the extraction of the central hub and the bearing. Proceed in reverse with the insertion of the new bearing and installation on the vehicle. Given the complexity of the operations, it is essential to choose a high-quality bearing.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front wheel bearing on the Toyota Corolla
How to replace the front wheel bearing on the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) The instructions in this guide will show you how to remove and replace the front wheel bearing on the Toyota Corolla. First, lift the vehicle and sta…
How to replace the drive shaft on the driver's side of the Toyota Corolla MK2
How to replace the drive shaft on the driver's side of the Toyota Corolla MK2
Toyota Corolla (2000-2007 / MK 2) In this video we can see how to replace the drive shaft from the driver's side of a Toyota Corolla: the drive shaft is the component that allows the …
Where to Find the Spare Wheel and Tools to Change It on the Toyota Corolla
Where to Find the Spare Wheel and Tools to Change It on the Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) The spare wheel and the kit to replace it in the Toyota Corolla are located in the boot. To retrieve it, open the boot of the car and lift the floor …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos