Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on a Toyota Tacoma

Model: Toyota Tacoma N170, N160, N150, N140, N190 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil and filter on a Toyota Tacoma, open the hood and unscrew the oil filler cap. Next, using a container, place it under the oil drain plug located at the lowest point of the oil pan (under the vehicle). Once the plug is removed, allow the old oil to drain from the pan and unscrew the corresponding filter.

Now, put a little oil inside the new filter and screw it into place. Now that all the used oil has been removed from the pan, you can screw in the drain plug.

Tip: Clean the area around the plug and the filter to ensure that there are no leaks once the oil is filled. Now you can add engine oil (about 5 quarts of 5W-30). For proper oil measurement, check the level with the dipstick.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Perform a Service on the Toyota Tacoma V6
How to Perform a Service on the Toyota Tacoma V6
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) This video shows the main steps to perform routine maintenance on the Toyota Tacoma V6 by replacing the engine oil and oil filter. First, lift the ve…
How to Reset the Oil Light on a Toyota Tacoma
How to Reset the Oil Light on a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) If you have just changed the engine oil and filter on your Toyota Tacoma, but the oil warning light keeps appearing at every start, don't worry becau…
Engine Oil Change on Toyota Tacoma
Engine Oil Change on Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) In this video tutorial, see how to change the engine oil on a third-generation Toyota Tacoma. Start by removing the metal shield located under the ve…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos