Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Toyota Tacoma

Model: Toyota Tacoma MK 2, N220, N240, N250, N260, N270 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the cabin air filter on a Toyota Tacoma by following some simple steps: first, purchase a new cabin air filter. Next, get inside the vehicle, turn off the engine, and engage the parking brake.

The cabin air filter is located behind the glove compartment, so open the compartment and remove all items inside. Remove the fastener on the right outer side; then press the sides of the drawer inward and lower the compartment.

Remove the cover of the filter box and take out the filter element from its housing. Clean the cabin filter housing and then install the new filter according to the arrows inside.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the License Plate Bulb on a Toyota Tacoma
How to Replace the License Plate Bulb on a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) To replace the license plate light bulb on a Toyota Tacoma, access the underside of the rear bumper to disconnect the connector attached to the bulb.…
How to Replace the Key Fob Battery on a Toyota Tacoma?
How to Replace the Key Fob Battery on a Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To replace the battery in the key fob of a Toyota Tacoma, you need to remove the cover located on the top of the device: once this small panel is rem…
How to Know the Fuse Diagram of a Toyota Tacoma
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) In this video, you can learn the fuse diagram of a Toyota Tacoma. The first fuse box is located in the engine compartment and contains fuses for: hig…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos