Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : Parking brake adjustment of a 2005 Toyota Tacoma

Toyota Tacoma - Video tutorial

Model: Toyota Tacoma N220, N240, N250, N260, N270, MK 2 - Years 2005-2015
Part: Hand brake
Operation: Parking brake adjustment of a 2005 Toyota Tacoma

The video shows how to adjust the parking brake of a 2005 Toyota Tacoma. Specifically, it shows how to remove the slack. It is a very simple operation that requires a few minutes and a little manual skill. To loosen the latch, you need to use two crescent wrenches, small, and hold them on the central nut on both sides to unscrew it. The latch is now completely loosened. Tighten the bolt (not too much) to make it adhere to the bolt. Subsequently, screw the nut again and tighten it, again with the help of the two crescent wrenches. The handbrake is now snug.


Posted on 8 June 2024 by ScegliAuto



Toyota Tacoma front brake pads replacement
Toyota Tacoma (2005-2015 / N220, N240, N250, N260, N270, MK 2) Today we will see, in this video tutorial, how to remove and replace the front brake pads of the Toyota Tacoma. First of all we lift the car and remo
Replacing one end of the bumper on a third generation Toyota Tacoma
Toyota Tacoma (2016-2024 / N300) The video shows how to replace one end of the rear bumper of a third generation Toyota Tacoma. It is a fairly simple operation that can be done on yo
How do you replace the front brake pads of a Toyota Tacoma?
Toyota Tacoma (2016-2024 / N300) To replace the front brake pads of a Toyota Tacoma, you need to lift the car so that the corresponding wheel is not in contact with the ground. Then,

    Frequently Asked Questions

    • Tacoma 1995-2004 - What problems did the emergency brake have on your 2003 Toyota Tacoma? Read Answer

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos