Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on the Toyota Tacoma

Model: Toyota Tacoma MK 2, N220, N240, N250, N260, N270 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Brake pads

See other generations:
Video tutorial

Today, in this video tutorial, you will learn how to remove and replace the front brake pads on the Toyota Tacoma. First, lift the vehicle and remove the front wheel; then, unscrew the two bolts of the front brake caliper located at the back, as shown in the video.

At this point, remove the old pads located inside the caliper; use a lever on the piston to retract it, and clean the caliper itself. Now you can insert the new brake pads, reassemble the front brake caliper, and put the wheel back on!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Toyota Tacoma
How to Replace the Front Brake Pads on a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) To replace the front brake pads on a Toyota Tacoma, lift the vehicle so that the corresponding wheel is off the ground. Then, loosen the lug nuts and…
How to Replace the Front Brake Pads on a Toyota Tacoma Mk2
How to Replace the Front Brake Pads on a Toyota Tacoma Mk2
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) This guide shows how to replace the brake pads on a Toyota Tacoma Mk2. First, lift the vehicle and remove the cap from the brake fluid reservoir. Rem…
Replacing the Front Wheel Bearing on a Toyota Tacoma
Replacing the Front Wheel Bearing on a Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) In this guide, follow the instructions to remove and replace the front wheel bearing on a Toyota Tacoma. First, lift the vehicle and remove the front…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos