Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulbs on the Toyota Tacoma Mk1

Model: Toyota Tacoma N150, N190, N140, N160, N170 - Years 1995-2004
Part: Tail light

This guide shows how to replace the brake lights on the Toyota Tacoma Mk1. Using a Phillips screwdriver, remove the four screws securing the rear light assembly; be careful not to damage the electrical connections. At this point, disconnect the electrical connector by prying up the locking tab. Using a small flathead screwdriver or a trim removal tool, pry around the edge of the lens to separate it from the socket. Now you can remove the brake bulb by pushing it in and turning it counterclockwise. After replacing the bulb, reassemble everything and check the operation of the light.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Stop Switch in a Toyota Tacoma Pickup?
How to Replace the Stop Switch in a Toyota Tacoma Pickup?
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) Replacing the stop switch in a Toyota Tacoma is a very simple and quick operation. Let's see how to proceed in this tutorial. Before doing this, ensu…
How to Replace the Low Beam Bulbs in a Toyota Tacoma?
How to Replace the Low Beam Bulbs in a Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) In this tutorial, see how to replace the low beam bulbs in a Toyota Tacoma, a very simple and quick operation. First, ensure the key is not in the ig…
How to know the fuse diagram of a Toyota Tacoma
Toyota Tacoma (1995-2004 / N150, N190, N140, N160, N170) In this video, you can learn about the fuse diagram of a Toyota Tacoma automobile. The first fuse box can be found in the engine compartment and cont…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos