Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Front Bumper of the Toyota Tacoma 2

Model: Toyota Tacoma MK 2, N220, N240, N250, N260, N270 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Front bumper

See other generations:
Video tutorial

In this short and simple video, you will see how to remove the front bumper of the second generation Toyota Tacoma by following the instructions below. First, open the hood and start by removing the plastic clips found at the top of the front bumper; then, unscrew the mounting screws as shown in the video.

Next, remove the front grille, and then remove the additional clips underneath; unscrew the screws located on both sides of the wheel wells and under the bumper. Finally, remove the bumper!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

Replacing a Bumper End on a Third Generation Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) The video shows how to replace a rear bumper end on a third generation Toyota Tacoma. It is a fairly simple operation that can be done alone in a few…
Replacement of the front headlight bulb of the Toyota Tacoma.
Replacement of the front headlight bulb of the Toyota Tacoma.
Toyota Tacoma (2016-2026 / N300) Let's see the necessary instructions on how to disassemble and replace the headlight bulb of the Toyota Tacoma. First, let's open the vehicle's hood …
Removing the Front Seat of the Toyota Tacoma MK3
Removing the Front Seat of the Toyota Tacoma MK3
Toyota Tacoma (2016-2026 / N300) In this video, learn how to remove the front seat from the third generation Toyota Tacoma in simple and quick steps. First, open the front and rear d…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos