Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box located in the Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Fuse box

See other generations:
Video tutorial

The Toyota Yaris Mk1 has two different fuse boxes installed. In this guide, discover how to locate them and proceed with any maintenance or replacement of the fuses.

Before you begin, ensure the car is turned off. Open the front bonnet, lift it fully, and locate the box situated to the right of the battery. Remove the cover, and you will have access to the various fuses.

For the secondary box, go to the passenger side and find the fuse cover in the lower area of the dashboard. Remove the cover here as well to access the fuses.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

Where is the Fuse Box in the New Toyota Yaris?
Where is the Fuse Box in the New Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) If you have recently purchased the new Toyota Yaris and are wondering where the fuse box is located, then this guide is all you need. Let’s find out …
What is the Fuse Diagram and Where is the Fuse Box on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) The video attached to this article shows the exact diagram and placement of all the fuses in your Toyota Yaris. Fuses are designed to prevent damage …
Where is the fuse box on the 2019 Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) The first fuse box on the 2019 Toyota Yaris is located inside the cabin, specifically under the steering wheel. The second fuse box is found under th…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos