Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a Toyota Yaris?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

As shown in this tutorial, resetting the oil service light on a Toyota Yaris is a very simple and quick operation. Before doing this, you must have completed all scheduled maintenance tasks.

Start by turning on the ignition, then, using the button located under the fuel gauge, set the trip display to "Trip A". Next, turn off the ignition and turn it back on while holding down the same button, keeping it pressed until the warning light disappears.

To verify that the procedure was successful, you can restart the ignition.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on the Toyota Yaris?
How to Reset the Oil Service Light on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you will learn how to reset the oil service light on the Toyota Yaris. This operation is extremely simple and quick, to be performe…
How to reset the service light on the Toyota Yaris?
How to reset the service light on the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) As we can see in this tutorial, resetting the service light on the Toyota Yaris is a very simple and quick operation. Before proceeding, ensure you h…
How to Reset the Oil Service Light on a Toyota Yaris?
How to Reset the Oil Service Light on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) Resetting the oil service light on a Toyota Yaris, as shown in this tutorial, is an extremely simple and quick operation. First, enter the cabin, the…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos