Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Toyota Rav 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Warning light – error code

This tutorial shows the steps to reset the maintenance light on a Toyota Rav 4. The operation is very simple; first, get into the car and turn on the instrument panel by pressing the start/stop button twice without starting the engine. At this point, on the right above the steering wheel, you will find the "disp" button and you need to press it to access the settings menu; when you see the "trip A" message, press and hold the disp button for a few seconds while simultaneously turning off and on the panel using the engine start/stop button. Once the panel is back on, you can release the button, and the reset will be complete. To verify the operation, turn off the panel and turn it back on, this time starting the engine.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Toyota RAV 4
How to Reset the Maintenance Light on the Toyota RAV 4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Today's guide will show you the procedure needed to reset the service light for the regular maintenance oil change on the Toyota RAV 4. First, get in…
How to Reset the Service Light on the Toyota RAV 4
How to Reset the Service Light on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the Service light on the Toyota RAV 4, turn on the ignition and navigate through the menu using the controls on the left side of the steerin…
How to reset the Service light on the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To reset the Service light on the Toyota RAV 4, turn the key to switch on the ignition. This will allow you to navigate through the menu that appears…

Other guides you may be interested in

    Frequently Asked Questions

    • Rav 4 2006-2013 - What does the Toyota Rav4 P / S warning light mean? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos