Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Remote Key Cover

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Key

See other generations:
Video tutorial

A common issue is the wear of the buttons on the remote key cover; this problem can be resolved quite economically as it is possible to purchase new remote shells or just the rubber cover for the buttons from the aftermarket. To separate the shells, unscrew the screw located at the back of the key, near the metal part, and lever between the shells; once separated, remove the electronic circuit, apply the new rubber cover to the buttons, and reassemble the shells by reapplying the screw.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Toyota Yaris
How to Replace the Key Battery on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) How do we change the battery of the remote key for our Toyota Yaris? In this video, see in detail how to do it. Take your remote key, and using a scr…
How to Change the Key Battery on a Toyota Yaris
How to Change the Key Battery on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today, we will show you how to change the remote battery on a Toyota Yaris. Take your remote and slide the button to release the metal key. Once extr…
Replacing the Key Fob Battery of the Yaris
Replacing the Key Fob Battery of the Yaris
Toyota Yaris (2011-2019 / Xp130) How do you dismantle the key fob of the Toyota Yaris? Here’s how to open the key fob and change the battery. Take your key fob and use a screwdriver …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos