Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Remote to Replace the Battery on Toyota RAV 4

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Key

See other generations:
Video tutorial

In this guide, discover the steps necessary to disassemble and replace the battery in the remote key for the Toyota RAV 4. First, take your key and start by unscrewing the small screw on the key to remove half of the shell; then unscrew the two screws of the inner shell to access the battery, as shown in the video.

At this point, remove and replace the battery with a new one of the correct type (in this case, a CR 1616 3V); insert it the right way round and reassemble everything, following the reverse procedure!


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Replacing the Remote Battery of the Toyota RAV 4
Replacing the Remote Battery of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Briefly follow the procedure to disassemble and replace the battery of the key remote for the Toyota RAV 4. First, take the remote in hand and start …
How to Replace the Remote Battery of the Toyota RAV 4?
How to Replace the Remote Battery of the Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the remote battery of the Toyota RAV 4, move the lever located at the bottom of the device: this will allow you to extract the key from it…
How to Replace the Remote Battery of the Toyota RAV 4?
How to Replace the Remote Battery of the Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the remote battery of the Toyota RAV 4, press the button located at the bottom and remove the key from its housing. Next, insert a thin ob…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos