Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Battery of the Toyota RAV 4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

Briefly follow the procedure to disassemble and replace the battery of the key remote for the Toyota RAV 4. First, take the remote in hand and start prying open the side slot of the remote to split it into two parts; then remove the rear casing to access the electronic board and the battery, as shown in the video.

At this point, remove and replace the battery with a new one of the correct type (in this case, a CR 2016 3V); insert it the right way round and reassemble the remote!


Updated on 5 September 2026 by ScegliAuto


Related tutorials

Replacing the Remote Battery on a Toyota Rav 4
Replacing the Remote Battery on a Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This guide shows you how to replace the battery in the remote control of a third-generation Toyota Rav 4. First, extract the physical emergency key b…
Guide to replacing the battery of the Toyota RAV 4 key remote.
Guide to replacing the battery of the Toyota RAV 4 key remote.
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this guide, we will see the steps that will allow us to replace the battery of the remote control key of the Toyota RAV 4. First, we take our remo…
Replacing the Key Remote Battery for the Toyota RAV4
Replacing the Key Remote Battery for the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In a few simple steps, we will see how to disassemble and replace the battery of the key remote for the Toyota RAV4. First, take your remote and star…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos