Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Filter on a Toyota Yaris?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Air filter

See other generations:
Video tutorial

In this video, we will see how to remove the air filter on a Toyota Yaris XP9. After opening the bonnet, take a Phillips screwdriver and loosen the clamp connecting the hose to the air filter housing. Remove the hose from the cover and unclip the two metal tabs holding it in place.

Now lift the cover to remove the old filter from its seat. Take the new filter and insert it in place of the old one, ensuring it fits snugly inside its housing.

Close the cover over it and reattach the hose in its original position by tightening the clamp.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light Bulb on a Toyota Yaris
How to Remove the Rear Light Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before you can start, open the tailgate of your Toyota Yaris. Begin by unclipping the clips that secure the internal cover on the side of the boot. N…
How to Replace the Air Filter on a Toyota Yaris VVT-i
How to Replace the Air Filter on a Toyota Yaris VVT-i
Toyota Yaris (1999-2005 / Xp10) Let’s briefly go over the steps necessary to remove and replace the engine air filter on a Toyota Yaris with a VVT-i engine. First, open the bonnet a…
How to replace the cabin air filter of the 2018 Toyota Yaris
How to replace the cabin air filter of the 2018 Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) The procedure you need to follow in order to successfully complete the replacement of the cabin air filter in your 2018 Toyota Yaris is practically i…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos