Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Toyota Sienta?

Model: Toyota Sienta Npc80 - Years 2003-2015
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin filter in the Toyota Sienta, a very simple and quick operation. It is located behind the glove compartment on the passenger side. To access it, you do not need to remove the entire compartment; just remove the bottom panel by unlocking the two upper clips. Once done, you can open the long rectangular white door and extract the old filter. Finally, install the replacement by following the exact reverse procedure and ensuring it is positioned in the correct direction, indicated on the edge of the filter itself.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Toyota Sienta
How to Replace the Air Filter on a Toyota Sienta
Toyota Sienta (2015-2023 / Nph170) To replace the air filter on a Toyota Sienta, open the hood to locate the filter box inside the engine compartment. The box, positioned at the front …
How to Replace the Air Filter on a Toyota Sienta?
How to Replace the Air Filter on a Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) To replace the air filter on a Toyota Sienta, remove the cover of the filter box located under the front passenger seat. Once the cover is removed, y…
Change the Engine Oil and Oil Filter in the Toyota Sienta
Change the Engine Oil and Oil Filter in the Toyota Sienta
Toyota Sienta (2015-2023 / Nph170) Let's go through the instructions for performing the routine maintenance service by changing the engine oil and oil filter in the Toyota Sienta. Firs…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos