Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change the Engine Oil and Oil Filter in the Toyota Sienta

Model: Toyota Sienta Nph170 - Years 2015-2023
Part: Engine oil

Let's go through the instructions for performing the routine maintenance service by changing the engine oil and oil filter in the Toyota Sienta. First, lift the vehicle and start unscrewing the oil drain bolt found on the oil pan using a socket wrench, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge and replace it with the new one, as shown in the video. Finally, pour in the new engine oil with the correct viscosity, checking the oil level and topping up if necessary!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Toyota Sienta
How to Replace the Air Filter on a Toyota Sienta
Toyota Sienta (2015-2023 / Nph170) To replace the air filter on a Toyota Sienta, open the hood to locate the filter box inside the engine compartment. The box, positioned at the front …
How to Replace the Air Filter on a Toyota Sienta?
How to Replace the Air Filter on a Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) To replace the air filter on a Toyota Sienta, remove the cover of the filter box located under the front passenger seat. Once the cover is removed, y…
How to Change the Engine Oil in a Toyota Sienta?
How to Change the Engine Oil in a Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) The process to replace degraded engine oil with new oil is almost identical for all cars. For convenience, we will analyze how this is done on a Toyo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos