Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Sienta
  6. : How do you change the engine oil in the Toyota Sienta?

Toyota Sienta - Video tutorial

Model: Toyota Sienta Nph170 - Years 2015-2023
Part: Engine oil
Operation: How do you change the engine oil in the Toyota Sienta?

The process of replacing degraded engine oil with new one is nearly the same for all cars. For convenience, we are going to analyze how this is done on a Toyota Sienta. The first thing to do is to free the engine from the old, now exhausted oil and this can be done by placing a fairly large container under the oil pan and unscrewing the locking pin. As the oil runs out we can replace the filter, remembering to fill it with clean oil before fitting it. We close the pin of the sump and go to the engine compartment to insert the new oil.


Posted on 14 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos