Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Sienta
  6. : How to disassemble the rear light in Toyota Sienta?

Toyota Sienta - Video tutorial

Model: Toyota Sienta Nph170 - Years 2015-2023
Part: Tail light
Operation: How to disassemble the rear light in Toyota Sienta?

In this tutorial we can see how to remove the rear light on the Toyota Sienta, a very simple and fast operation, to be carried out for example if we need to replace a bulb. First of all, make sure that the key is not inserted, then open the tailgate and unscrew the two bolts indicated with a 10mm socket wrench. Next, we grab the headlight, pull it towards us and disengage it from the bodywork. To replace a bulb, extract it from its housing by turning it slightly anticlockwise. On the contrary, let's rotate it clockwise to fix it.


Posted on 10 June 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos