Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Intake Manifold on a Toyota Sienta

Model: Toyota Sienta Nph170 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

See other generations:
Video tutorial

In this guide, find the main instructions on how to remove and replace the intake manifold on a Toyota Sienta. First, open the hood of your car and start disconnecting and removing the various wiring harnesses located above the intake manifold by disconnecting the connectors and removing the screws with a socket wrench; then, remove the screws at the base of the intake manifold to take it off, as shown in the video.

At this point, install the new manifold, following the video tutorial to the end!


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Toyota Sienta (2015-2023 / Nph170) In this tutorial, see how to remove the rear light on a Toyota Sienta, a very simple and quick operation, for example, if you need to replace a bulb.…
Toyota Sienta (2015-2023 / Nph170) The battery in the Toyota Sienta is located in the engine compartment and is accessible by opening the front hood of the car. You can see it immediat…
Toyota Sienta (2015-2023 / Nph170) Replacing the remote battery in a Toyota Sienta, as shown in this tutorial, is a very simple and quick operation. You will only need a replacement CR…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos