Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sienta
    4. : How to replace the Toyota Sienta remote control battery?

Toyota Sienta - Video tutorial

Model: Toyota Sienta Nph170 - Years 2015-2023
Part: Key
Operation: How to replace the Toyota Sienta remote control battery?

Replacing the Toyota Sienta remote control battery, as we can see in this tutorial, is an extremely simple and fast operation. To do this, we will only need a replacement CR2032 battery. First of all we hold down the button located along the left edge, then extract the metal emergency key and use it to separate the two halves of the remote control by levering it into the indicated slot. Once fully open, remove the internal door, extract the old battery and insert the spare one, taking care to respect its direction.


Posted on 14 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos