Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sienta
    4. : Toyota Sienta remote control battery replacement

Toyota Sienta - Video tutorial

Model: Toyota Sienta Npc80 - Years 2003-2015
Part: Battery
Operation: Toyota Sienta remote control battery replacement

In this guide, we will see how to replace the remote control battery of the Toyota Sienta key in simple steps. First, let's pick up the key remote control and start by removing the physical key from inside it; then we leverage on the sides to open the remote control shells in two parts, thus accessing the battery compartment, as shown in the video. Now let's replace the battery with the new one, of the right type (in this case a 3V CR 2032); let's insert it in the correct direction and then assemble the two shells of the remote control, inserting the key!


Posted on 21 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos