Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Toyota Sienta?

Model: Toyota Sienta Nph170 - Years 2015-2023
Part: Battery

If you need to replace the vehicle's battery because it is causing issues and you have verified with a tester that it can no longer provide the necessary power to start the engine, follow these steps: open the hood and locate the battery on the right side, just behind the headlight. First, disconnect the negative terminal, then the positive terminal. At this point, you can remove the battery from its housing and take the new one, ensuring it is the same model. Reconnect the positive terminal first, followed by the negative terminal.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery for the Toyota Sienta?
How to Replace the Remote Battery for the Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) To replace the remote battery for the Toyota Sienta, pry open the remote using a tool like a screwdriver in the groove located on the back. This will…
How to Change the Battery in a Toyota Sienta?
How to Change the Battery in a Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) The battery in the Toyota Sienta is located in the engine compartment and is accessible by opening the front hood of the car. You can see it immediat…
How to Replace the Remote Battery in a Toyota Sienta?
How to Replace the Remote Battery in a Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) Replacing the remote battery in a Toyota Sienta, as shown in this tutorial, is a very simple and quick operation. You will only need a replacement CR…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos