Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sienta
    4. : How to replace the V-belt of the Toyota Sienta?

Toyota Sienta - Video tutorial

Model: Toyota Sienta Nph170 - Years 2015-2023
Part: V-belt
Operation: How to replace the V-belt of the Toyota Sienta?

To be able to replace the V-belt of the Toyota Sienta, it is necessary to completely disassemble the front fender relative to the right wheel: to be able to disassemble this fender, open the hood and unscrew the screws that secure it from the top and from the inside of the wheel arch. Once this piece has been removed, it will be possible to have access to the belt, which will have to be removed from its pulleys and replaced with a new one; after replacement, the corresponding mudguard can be re-fitted, checking that everything works correctly.


Posted on 7 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos