Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sienta
    4. : V-belt

Toyota Sienta - V-belt

Toyota Sienta (2015-2023 / Nph170)
How to replace the V-belt of the Toyota Sienta?
To be able to replace the V-belt of the Toyota Sienta, it is necessary to completely disassemble the front fender relative to the right wheel: to be able to …read all…
Posted on 7 October 2022 by ScegliAuto
Airbags (1) Antenna (1) Car stereo (2) Battery (6) Spark plugs (1) Key (7) V-belt (1) Tail light (1) Air filter (4) Cabin air filter (1) Headlight bulb (1) Engine oil (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos