Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Sienta
  6. : Car stereo

Toyota Sienta - Car stereo

Toyota Sienta (2015-2023 / Nph170)
Replacement of the stock car radio with the Android one on the Toyota Sienta

Let's see in this guide the steps on how to disassemble and replace the stock car radio of the Toyota Sienta, following the instructions below. First of all we …read all…
Posted on 18 September 2022 by ScegliAuto
Toyota Sienta (2003-2015 / Npc80)
How to disassemble the car radio of the Toyota Sienta

Let's see in this guide how to disassemble and replace the Toyota Sienta car stereo, following the instructions below. First of all, let's get on board the car …read all…
Posted on 27 July 2022 by ScegliAuto

Airbags (1) Antenna (1) Car stereo (2) Battery (6) Spark plugs (1) Key (7) V-belt (1) Tail light (1) Air filter (4) Cabin air filter (1) Headlight bulb (1) Engine oil (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos