Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sienta
    4. : Air filter

Toyota Sienta - Air filter

Toyota Sienta (2015-2023 / Nph170)
How to replace the air filter on Toyota Sienta?
If we want to replace the air filter on this car we can find instructions on how to behave in this description and in the video. First of all, open the bonnet …read all…
Posted on 28 April 2023 by ScegliAuto
Toyota Sienta (2003-2015 / Npc80)
How to replace the air filter on Toyota Sienta [WORLD]
If we want to proceed with the replacement of the engine air filter on this car, find the simple instructions given in the video tutorial and by referring to …read all…
Posted on 15 April 2023 by ScegliAuto
Toyota Sienta (2015-2023 / Nph170)
How do I replace the Toyota Sienta air filter?
The replacement of the Toyota Sienta air filter is done by opening the hood, so that you can locate the filter box inside the engine compartment. The box, …read all…
Posted on 18 May 2022 by ScegliAuto
Toyota Sienta (2015-2023 / Nph170)
How do I replace the Toyota Sienta air filter?
In order to replace the Toyota Sienta air filter, you need to remove the filter box cover, which is located under the front passenger seat. Once the cover has …read all…
Posted on 15 May 2024 by ScegliAuto
Airbags (1) Antenna (1) Car stereo (2) Battery (6) Spark plugs (1) Key (7) V-belt (1) Tail light (1) Air filter (4) Cabin air filter (1) Headlight bulb (1) Engine oil (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos