Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Sienta
  6. : Replacement of the stock car radio with the Android one on the Toyota Sienta

Toyota Sienta - Video tutorial

Model: Toyota Sienta Nph170 - Years 2015-2023
Part: Car stereo
Operation: Replacement of the stock car radio with the Android one on the Toyota Sienta

Let's see in this guide the steps on how to disassemble and replace the stock car radio of the Toyota Sienta, following the instructions below. First of all we get on board the car and start removing the plastic cover that we find on the side of the radio; then we unscrew the fixing screws of the display, thus removing the entire original multimedia system, as shown in the video. At this point we are going to install the new car stereo, of the Android type; if necessary, we make changes to the wiring and reassemble everything, following the video tutorial until the end!


Posted on 18 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos