Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. C Hr
    4. : How to reset TPMS on Toyota C hr

Toyota C Hr - Video tutorial

Model: Toyota C Hr Ax50, Ax10, MK 1 - Years 2016-2023
Part: -board computer
Operation: How to reset TPMS on Toyota C hr

If we have noticed that the tpms low tire pressure warning light comes on on the car, it is necessary to check the pressures on all four tires and, if necessary, re-inflate and restore the foreseen pressures. After doing this it is necessary to reset the yellow light on the instrument panel, to do this we follow the instructions below. The first thing to do is access the passenger compartment, turn on the ignition and with the arrow controls on the right side of the steering wheel select the settings menu functions and press Ok then go to set press ok again and confirm that the settings values have been updated. pressures. This will turn off the low tire pressure warning light.


Posted on 10 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Toyota C Hr 2016-2023 - What problems does the Toyota C Hr Hybrid have? Read Answer
    • Toyota C Hr 2016-2023 - What does the PS light mean in Toyota? Read Answer
    • Toyota C Hr 2016-2023 - What are the problems of the Toyota C Hr hibrid 2.0? Read Answer
    • Toyota C Hr 2016-2023 - What to do with the Toyota CHR tire warning light on? Read Answer
    • Toyota C Hr 2016-2023 - What to do when the tire pressure warning light on Toyota Chr comes on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos