Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery in a Toyota Yaris 2

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Battery

Thanks to this short video guide, let's see how to replace the battery on a second generation Toyota Yaris, model in production from 2005 to 2011. First we have to open the bonnet and remove the sealing bar with a key English 10mm, then we can start to disconnect the poles of the battery, starting from the negative pole (black) and then the positive pole (red). Once this is done we can remove the old battery and insert a new one, finally reassemble everything by following the procedure in reverse, therefore starting to attack the positive pole first and then the negative.


Posted on 9 September 2024 by ScegliAuto



How to replace the key battery of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let's start by inserting the tip of a slotted screwdriver into the slot on the side of the key of our Toyota Yaris, and then leverage. After that, we
Where is the battery located in the Toyota Yaris Hybrid?
Toyota Yaris (2020-2024 / MK 4) Unlike many Toyota models, the Yaris Hybrid places the battery inside the vehicle. The battery of the Toyota Yaris Hybrid is actually located inside
How to replace the Toyota Yaris 1.5 battery
Toyota Yaris (2011-2019 / Xp130) In today's video tutorial we will see how to disassemble and replace the Toyota Yaris 1.5 engine battery, following the instructions below. First we

    Frequently Asked Questions

    • Yaris 2020-2027 - Where is the Toyota Yaris Hybrid battery located? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos