Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Toyota Auris

Model: Toyota Auris E150 - Years 2007-2012
Part: Headlight bulb

If you want to independently replace the front headlamp bulb on your Toyota Auris first generation (2007-2012) but don't know how, don't worry as you will find all the necessary instructions below. First, turn off the car and lift the front bonnet. Next, locate the protective cap at the rear of the headlamp and remove it by hand. Then, also remove the battery holder located just below and proceed to replace the old bulb with the new one. Finally, reassemble everything correctly and you're done.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on the Toyota Auris?
How to replace the headlight bulb on the Toyota Auris?
Toyota Auris (2012-2018 / E180) To replace the headlight bulb on the Toyota Auris, open the bonnet to access the internal components of the engine bay. Here, you will locate the bac…
Replacing Front Headlamp Bulb on Toyota Auris
Replacing Front Headlamp Bulb on Toyota Auris
Toyota Auris (2012-2018 / E180) In this video tutorial, you will learn how to remove and replace the front headlamp bulb on a second-generation Toyota Auris. First, open and lift th…
How to Replace the Front Headlight Bulb on the Toyota Auris
How to Replace the Front Headlight Bulb on the Toyota Auris
Toyota Auris (2012-2018 / E180) To replace the front headlight bulb on the Toyota Auris, open the bonnet to access the engine compartment. This will allow you to loosen the screws s…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos