Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter of the 2019 Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

If you haven't replaced the cabin air filter for a long time and want to know how to do it, follow the steps in this guide. First, ensure the vehicle is parked safely, then move to the front passenger seat.

Once there, open the glove compartment and locate the safety latch on the side of the compartment. Act on it to remove the entire compartment, then remove the cover of the air filter box and replace the filter.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Change the Air Filter on the Toyota Yaris
How to Change the Air Filter on the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Replacing the air filter on the Toyota Yaris 1.0 petrol is very simple. First, open the bonnet and remove the four clips that secure the engine cover…
How to Remove the Air Filter on a Toyota Yaris
How to Remove the Air Filter on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To remove the air filter on a Toyota Yaris, open the car door, lift the engine compartment release lever located at the bottom left of the dashboard,…
Replacing the Cabin Air Filter on the Toyota Yaris XP130
Replacing the Cabin Air Filter on the Toyota Yaris XP130
Toyota Yaris (2011-2019 / Xp130) Let’s go through the steps to remove and replace the cabin air filter or air conditioning filter on the Toyota Yaris XP130. First, get inside the veh…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos