Do it yourself
| ||||
|
Toyota Rav 4 - Video tutorial
Model: Toyota Rav 4
Xa40, MK 4
- Years 2013-2018 To reset the tire pressure warning light on a Toyota RAV 4, you must first inflate the car's tires, bringing them to the correct pressure value: this value is indicated on the sticker attached to the driver's door pillar. Once all the tires have been inflated, you can go inside the car and turn on the instrument panel; at this point, you will need to press and hold the button located under the steering column, where the icon for insufficient pressure is indicated. By holding down this button, the warning light will disappear from the instrument panel.
Posted on 4 May 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |