Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Hub Bearing in a Toyota RAV4?

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Bearing

See other generations:
Video tutorial

In this tutorial, see how to replace the rear hub bearing in a Toyota RAV4, a simple operation but requiring some experience. First, lift the rear of the car with a jack, taking all necessary precautions, then remove the wheel and brake drum.

Next, remove the inner retaining clip by bending it with pliers, extract it, and unscrew the central bolt with a 30 mm socket. Once done, unscrew the bearing fixing bolts with a 14 mm spanner, extract it from the hub, and fit the replacement by following the reverse procedure.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

Wheel Bearing Replacement on Toyota Rav 4
Wheel Bearing Replacement on Toyota Rav 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Replacing the wheel bearing on a Rav 4? Let's see how to disassemble the part. Lift the car with a jack, remove the bolts, and take off the wheel. Ne…
Replacement of the rear wheel bearing of the Toyota RAV 4
Replacement of the rear wheel bearing of the Toyota RAV 4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Below we will discover the steps on how to disassemble and replace the rear wheel bearing of the Toyota RAV 4. First, let's lift the vehicle and star…
How to replace the drive belt of a Toyota RAV4 II
How to replace the drive belt of a Toyota RAV4 II
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In this video, we see how to replace the serpentine belt on a Toyota Rav4 MK2: we lift the car to access the tensioner pulley using a wrench, so we c…

How to Remove the Telepass from the Windscreen?

To remove the Telepass from the car's windscreen, use a very thin wire. Insert it between the device's attachment and the windscreen itself: the Telepass is fixed to the inner part of the windscreen using adhesive. Once the wire is inserted, move it laterally and vertically to ensure the adhesive is consumed. When the adhesive has been consumed, you can completely detach the Telepass from its housing and then clean the area.

Watch the video!


by ScegliAuto

More videos