Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the drive belt of a Toyota RAV4 II

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: V-belt

See other generations:
Video tutorial

In this video, we see how to replace the serpentine belt on a Toyota Rav4 MK2: we lift the car to access the tensioner pulley using a wrench, so we can remove the worn belt by pulling it out sideways. We would have taken a photo of the belt's position beforehand to make sure we put it back in the right place; however, the video transparently provides a diagram that allows us to put everything back in the exact position.

We then put the belt back in place, making sure it is not necessary to also change the tensioner bearing. We pull the tensioner pulley sideways so the belt is properly tensioned.

We can lower the car back down, job done.


Posted on 12 March 2025 by ScegliAuto


Related tutorials

Toyota Rav 4 (2000-2006 / MK 2, Xa20) In today's guide, you will find all the necessary instructions on how and when to replace the timing belt on the second generation Toyota Rav4 with a…
Toyota Rav 4 (1994-2000 / Xa10, MK 1) Today we will see the necessary instructions to remove and replace the timing belt on the first series Toyota Rav4. First, open the bonnet of your ca…
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In today's tutorial video, you will learn how to disassemble and remove the timing belt from a Toyota Rav4 2.0 D-4D. First, open the bonnet and remov…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos