Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Toyota Rav4 2.0 D-4D timing belt replacement

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Timing belt

In today's video tutorial we will see how to disassemble and remove the timing belt of a Toyota Rav4 2.0 D-4D. First we open the bonnet and remove the engine protection plastic; then we lift the car, removing the right side mudguard, and we access the pulleys where the belt is located. At this point we are going to loosen the pretensioner with a socket wrench and remove the plastic cover of the service belt; now we are going to remove the toothed pulley nut and remove the timing belt, following the various tips illustrated in the tutorial.


Posted on 14 February 2024 by ScegliAuto



Instructions on when and how to replace the timing belt on the Toyota Rav4 2.0 D-4D
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In today's guide we will see all the necessary instructions for how and when to replace the timing belt on the second series Toyota Rav4, with 2.0 D-
Replace the timing belt on the Toyota Rav4 MK1
Toyota Rav 4 (1994-2000 / MK 1, Xa10) Today we will see the instructions necessary to disassemble and replace the timing belt on the Toyota Rav4 first series. First of all we open the bon
How do you replace the timing belt of a Toyota Rav4?
Toyota Rav 4 (1994-2000 / MK 1, Xa10) The replacement of the timing belt on the Toyota RAV 4 is done by lifting the car with a jack or a hoist, so that the right front wheel and its fende

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos