Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Toyota Rav4

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Timing belt

See other generations:
Video tutorial

Today we will explain how to replace the timing belt of the Toyota Rav4 model 2. To perform the belt replacement, we need to chock the wheels, loosen and remove the bolts to lift the car. After locating the belt tensioner pulley, slowly pull the pulley to loosen the belt and remove it. Grease the new belt and insert it, making sure it is aligned with the pulleys.

Return the tensioner pulley to its original position and rotate the engine shaft by hand to check the belt's operation.

Mount the front wheels and tighten the bolts to lower the car. During the replacement, it is important to make sure the engine is off and the battery is disconnected to avoid accidents.


Posted on 19 July 2025 by ScegliAuto


Related tutorials

Replacing the Timing Belt on Toyota Rav4 2.0 D-4D
Replacing the Timing Belt on Toyota Rav4 2.0 D-4D
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In today's tutorial video, you will learn how to disassemble and remove the timing belt from a Toyota Rav4 2.0 D-4D. First, open the bonnet and remov…
How to Replace the Timing Belt on a Toyota Rav4
How to Replace the Timing Belt on a Toyota Rav4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To replace the timing belt on a Toyota Rav4, you need to remove the engine from its bay to access the left side of the engine block. Here, you will n…
How to Adjust the Timing Belt on the Toyota RAV4
How to Adjust the Timing Belt on the Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this video, you will see how to adjust the timing belt on the Toyota RAV4: check that the camshaft is aligned with the cylinder head. The TDC (top…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos