Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on a Toyota RAV 4

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Timing belt

See other generations:
Video tutorial

Let's look at the main steps and instructions on how to remove and replace the timing belt on a Toyota RAV 4. First, open the bonnet of the vehicle and begin by removing the engine support on the timing side; raise the vehicle and remove the front right wheel, disconnecting the serpentine belt and removing the crankshaft pulley, as shown in the video.

At this point, remove the timing cover to access the belt, removing it and replacing it with the new original one; check the wear condition of the timing components.


Posted on 10 June 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Toyota RAV 4 2.0 D
Guide to Replacing the Timing Belt on the Toyota RAV 4 2.0 D
Toyota Rav 4 (2000-2006 / MK 2, Xa20) This guide will show you how to remove and replace the timing belt on the Toyota RAV 4 2.0 D. In this case, the removal and replacement of the timing…
How to Replace the Timing Belt and Water Pump on the Toyota RAV 4
How to Replace the Timing Belt and Water Pump on the Toyota RAV 4
Toyota Rav 4 (1994-2000 / Xa10, MK 1) Today, we will go through the instructions for removing and replacing the timing belt on the Toyota RAV 4. First, lift the vehicle and start by remov…
Guide to Replacing the Timing Belt of the Toyota RAV 4 2.0 D-4D
Guide to Replacing the Timing Belt of the Toyota RAV 4 2.0 D-4D
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In this brief guide, you will find instructions to remove and replace the timing belt of the Toyota RAV 4 D-4D. First, open the bonnet of the vehicle…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos