Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt and Water Pump on the Toyota RAV 4

Model: Toyota Rav 4 MK 1, Xa10 - Years 1994-2000
Part: Timing belt

Today, we will go through the instructions for removing and replacing the timing belt on the Toyota RAV 4. First, lift the vehicle and start by removing the front right wheel. Then, remove the serpentine belt and subsequently the crankshaft pulley by unscrewing the central bolt, as shown in the video. At this point, remove the timing cover and disconnect the various wiring harnesses to access the timing belt. Take the necessary references for replacing the timing belt, following the video tutorial to the end!

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Toyota RAV 4 D-4D
Guide to replacing the timing belt of the Toyota RAV 4 D-4D
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Today's information will allow us to dismantle and replace the timing belt of the Toyota RAV 4. First, we open the hood of the car and begin to disma…
How to Remove and Replace the Timing Belt on a Toyota Rav 4
How to Remove and Replace the Timing Belt on a Toyota Rav 4
Toyota Rav 4 (1994-2000 / MK 1, Xa10) Prepare to remove and replace the timing belt on a Toyota Rav 4. Lift the bonnet, remove the engine soundproofing panel and the timing belt cover. On…
Replacing the Timing Belt on a Toyota Rav 4
Replacing the Timing Belt on a Toyota Rav 4
Toyota Rav 4 (1994-2000 / MK 1, Xa10) Learn how to replace the timing belt on a Toyota Rav 4. First, lift the front bonnet of the car, then remove the various covers on the left side. Rai…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos