Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Yaris?

Model: Toyota Yaris Xp130 - Years 2011-2019
Part:

In this tutorial, see how to reset the tyre pressure light on a Toyota Yaris, an extremely simple and quick operation, to be performed only after restoring the correct pressure in each tyre according to the instructions in the manual. Start by entering the cabin, then insert the key and turn on the ignition. Next, locate the indicated button, located below the dashboard on the driver's side, and hold it down for the necessary time until the light disappears completely. Restart the vehicle to verify that the reset was successful.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure warning light on the Toyota Yaris, first inflate the tyres to the correct pressure value, which is indicated on the sticke…
How to reset the tyre pressure warning light on the Toyota Yaris?
How to reset the tyre pressure warning light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure warning light on the Toyota Yaris, turn on the ignition by rotating the key in the ignition switch. Once the dashboard lig…
How to reset the tyre pressure warning light on the Toyota Yaris?
How to reset the tyre pressure warning light on the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To reset the tyre pressure warning light on the Toyota Yaris, first inflate the tyres to the correct pressure value: this value is indicated on the s…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What to do in case of tire warning light on Toyota Yaris? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos