Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Warning Light on the Toyota Yaris?

Model: Toyota Yaris MK 4 - Years 2020-2026
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Toyota Yaris, first inflate the tyres to the correct pressure value, which is indicated on the sticker inside the driver's door pillar. Once all tyres are inflated, turn on the ignition and wait a few minutes for the sensors to read the new pressure values. If these are correct, you will notice that the tyre pressure warning light will turn off.

Updated on 1 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure light on the Toyota Yaris, first inflate the tyres to the correct pressure, which is indicated on the sticker attached to …
Toyota Yaris (2011-2019 / Xp130) This guide shows how to reset the tyre pressure warning light on the 2019 Toyota Yaris. The reset procedure requires pressing the button located at t…
Toyota Yaris (2020-2026 / MK 4) In order to reset the tire pressure warning light on the Toyota Yaris, you will need to inflate the tires until they are brought back to the correct …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos