Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Sienta
  6. : How do you remove the steering wheel airbag of the Toyota Sienta?

Toyota Sienta - Video tutorial

Model: Toyota Sienta Nph170 - Years 2015-2023
Part: Airbags
Operation: How do you remove the steering wheel airbag of the Toyota Sienta?

In order to remove the airbag from the steering wheel of the Toyota Sienta, you need to loosen the screws that secure the airbag inside its housing: these screws are located at the lower rear part of the steering wheel and need to be removed in order to extract the airbag. Before being able to completely remove it, you will also need to disconnect the connectors attached to the back: at this point, you will be able to connect the new airbag and position it in the center of the steering wheel. This way, you can securely fix it back in place by screwing the screws into the rear part of the steering wheel.


Posted on 6 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos